Propeller 30m QRSS Received in California

Another report for the Propeller 30m QRSS Beacon, it has been received by Mark - K6HX of the Brainwagon.com blog and can be seen on his Grabber.

My signal is shown about 1/3 down from the top,  the transmitted repeated pattern is above the white line (oops, all of the lines are white :-)

Beacon Signal Received
 at: http://qrss.info

700 Miles

The Propeller QRSS Beacon output at 62.5mW on 10,140060MHz, the current data format is:

• CW ID at ~15WPM,
• A Propeller Graphic,
• My CALL in SlashCode (i.e,. "/\\ /\ \\\\\ //\ /\\ ////" ), where "/" is a dit, and "\" is a dah.
• Followed by a WA Graphic

Of course, because the signal (and output format) is just software, it could change on a whim.

-